Search Marketing InsiderPay Per Click, Social Media and SEO Strategies – An Internet Marketing Institute Publication

Did you know there were nearly 16 billion core searches during August 2010 in the US? According to comScore recent data reports, Google led the US core search market in August with 65.4% search market share, followed by Yahoo at 17.4% and Microsoft Bing with 11.1%.

Looking at the search market share data from 2009 compared to 2010 (chart below), the numbers show that Google has remained relatively flat over the last year. However, recent September 2010 data reveals that Google search shares are showing modest gains. Meanwhile, Yahoo continues to drop in search share, and Bing shows only slight gains in search growth year over year.

The chart below shows data for search market share (August 2010 versus 2009) in the US for: Google, Yahoo, Bing, Ask and AOL, provided by the Silicon Valley Insider.

(Source: Silicon Alley insider)

Search Market Share: Google and Bing Upward Movement in September 2010

• Google remained flat from August 2009 to August 2010, but in September 2010 showed modest gains 66.1% up from 65.4% in August.
• Yahoo! continues to lose ground with 16.7% in September 2010, down from 17.4% in August 2010.
• Bing has grown year over year, and continues to increase slightly to 11.2% in September from 11.1% in August 2010.

Taking a look at the latest numbers from September 2010 search share comScore data, Google gained while Yahoo took a hit and Microsoft Bing shows slight growth. The Google share gains reflect the impact of Google Instant Search (the new feature that provides results in real-time while users type their search words). And Bing has managed to slightly increase market share in spend and in clicks partially due to the Yahoo-Bing integration. The new Facebook Like social data stands to improve Bing search results and help increase Bing market reach as well. However, Bing Marketers are waiting to see any real boost in search marketing results.  Make no mistake, Google is the dominate player with nearly 66% of the market share.

The upcoming online shopping season should spur stronger search marketing ROI.  We’ll be watching the search market trends to see how they pan out during the–fast approaching–holiday shopping season!

**************************
Kelly Larsen, Director of Marketing at PPC Summit and Landing Page Success Summit, the Web’s largest conversion conference coming up on November 3-23, 2010.

By Dennis Yu, The Co-founder and Chief Executive Officer of BlitzLocal

You may have read these HitWise numbers  on how Facebook has overtaken Google as the most popular site in the United States– now at 7.07% of all visits versus Google at 7.03%.  At 400 million users and 25% of all traffic (not visits), it’s not just teenagers anymore. Did you know that Facebook serves 150 million search queries a day? Industry estimates place Google at 250 to 400 million queries per day.

Thus, “search” is not a website– it’s a function that occurs across any site or application. Think of websites as vertical bars, while applications such as search, commenting, and user participation as horizontal slices that go across these sites.  Even the concept of a “website” is being blown away– note that most users of twitter are interacting not at twitter.com, but via a 3rd party tool or within another blog. Whether it’s @anywhere or even the APIs being released by CitySearch and Foursquare, it’s clear that there’s a increasingly shared data layer underneath these websites. Think of the sewer and electrical grid that is below Manhattan.

I had a chance to sit down with Alex Schultz, who runs online marketing for Facebook– he is also in charge of Facebook’s SEO.  He mentioned the concept of “interestingness squared, boringness squared”. Let’s say you have 500 friends and each friend, on average, has 20 things they do each day that could be shown in the feed.  Thus, with no filter, you would see 10,000 items in your feed on your Facebook homepage. Impossible to sort the noise on what’s important or most relevant to you.

Facebook must choose what to show, based on the influence of each user, their track record (are they spamming others or is their stuff being actively shared and commented on), and general “karma” FriendRank-like factors.  Thus, the things that are interesting get promoted in the social graph– to quickly become viral.  And things that are boring get buried, never to be shown in activity stream.

This morning, Facebook released some insights into how their search works.  It’s worth a read if you some time, but let’s just say that they’re serving personalized search results based on proximity (of the many “Jose Gonzales” in the world, show the one that has the most mutual friends in common), popularity, and context. I’m in Boulder today, so my search for cosmetic surgery here should ideally yield a different result than someone searching from Chicago.  Google’s Caffeine and the introduction of personalized results from your friends only starts to approach what happens on Facebook.

5,000 new businesses join Facebook each day.  Google has about 570,000 advertisers on AdWords. Do the math.  Who has the deeper relationships and has 50% of visits from users that log in at least once a day? Facebook is on track to hit a billion dollars in annualized revenue, if they haven’t already.

Are you using Facebook’s self-serve ad platform yet?  For the 2.5 years, we’ve treated Facebook PPC as another paid search channel, just behind Google, while ahead of Yahoo! and Bing.  And the results for Facebook lead gen and consumer product have been phenomenal.  They will continue to be so long as the territory is still new to advertisers and agencies– and clients understand that social media, properly targeted, and integrated with other channels, is quite effective.

Google has discussed that they’re incorporating social signals into ranking factors.  An article that a couple years ago might have generated 50 links might today generate 10 links and 300 mentions on twitter and Facebook.  Facebook now opening up pages to be indexed, along with many other previously private default options, means that you should be sending stronger signals in social media to influence search results not just on Facebook, but in traditional search engines, too.

So what does this mean for your business?

1. Create and pimp out your fan page immediately. When you get to 100 users, grab your vanity url at facebook.com/username. Get customers and friends to comment and participate regularly, knowing this can generate a viral effect, plus generate links to your fan page (links between pages are votes for Google, while fanning on fan pages are votes for Google).

2. Start testing Facebook’s PPC.  Run traffic to both your fan page and site, to build up a fan base and generate a viral effect. Use proper analytics and attribution, determine the effect of the “assist” on organic search traffic and direct traffic, much like a view-through conversion.

3. Run demographically targeted ads on the Google Content Network– this is a good proxy for what will work on Facebook and MySpace self-serve, given your display creatives and demographic targets are in alignment.

4. Focus more on offers and “interestingness”. Remember what Alex Schultz said about “interestingness squared” earlier? With the rise of local, social, and mobile games– or platforms like Gowalla that effectively are video games, make sure what you are saying doesn’t sound like a shameless ad.  Make it cool, interesting, or perhaps even offer a coupon.  Is it funny or shareable in some other aspect?

5. Begin reaping the rewards for being a first-mover. The spammers were first, but your legitimate brand is still early in the game. 

*****************
Dennis Yu is an entrepreneur and internationally recognized lecturer in search engine marketing. Areas of expertise include search marketing technical analysis and pay-per-click (PPC) ad campaign development and optimization. He is co-founder and chief executive officer of BlitzLocal, a Denver area firm that provides local search solutions for enterprises of all sizes. Dennis is also a regular speaker at leading industry events like AdWords Advantage Online Summit and the upcoming PPC Summit Presents…Search & Social Media Success.

By Kelly Larsen Director of Marketing, PPC Summit 

At past PPC Summit events, attendees have shown a lot of interest in WordStream’s keyword tool so we decided to provide a more detailed look at how these tools work. We recently had the opportunity to talk with Larry Kim, Founder and VP of Product Development at WordStream, to learn about their new keyword tools. Larry walked us through how the Keyword Niche Finder and Keyword Grouper work and how you can use them to enhance your SEO and PPC results. We wanted to share some of the cool product takeaways in the following Q&A on how these tools can help you better manage the keyword development process.

1.  How do these new tools help Search Marketers do their jobs better?
We launched these free Keyword tools to offer Search Marketers a broader range of keyword development and management options. The Keyword Niche Finder is designed to help prioritize content, keyword targeting and campaign creation based on an entire “keyword universe” surrounding a topic. It helps Search Marketers find the most popular pockets of related keywords (keyword niches) rather than individual keywords. And the Keyword Grouper helps Search Marketers organize their own keyword lists and data into actionable groups and niches.

 Advantages of The Keyword Niche Finder and Keyword Grouper:
a. Identify Keyword Niches Versus Single Keywords – Many times the most popular   keyword will perform best on your site, but not always.

b. Discover In-depth Keyword Variations – The Niche Finder offers popular variations within a given keyword cluster. This helps to vary page content and anchor text – something SEOs advocate – and it helps to structure comprehensive PPC campaigns or Ad Groups.

c. Improve Campaign Structure – These tools help to create a well-organized, semantically themed campaign and Ad Group structure for paid search accounts.

2. What are keyword niches and how do they help SEO and PPC campaign performance?
Keyword niches are groupings of tightly related keywords that can be used to drive paid and organic search marketing strategies.

For SEO purposes, identifying keyword niches helps marketers prioritize SEO workflow, identify promising topics for Web content and blog posts, and ensure that a website is optimized for the most profitable keywords.

As for PPC performance, when you identify keyword niches in your vertical, it allows you to create a strong PPC account structure at inception. This will save time and money by delivering more relevant ads, which in turn generate more clicks and improve your Quality Score.

3. How does the Keyword Niche Finder work?
Let’s take a look at the Niche Finder in action. It’s interesting to compare the results of a traditional keyword tool to The Free Keyword Niche Finder, as shown below. Here are results from WordStream’s Free Keyword Tool:

 
Now let’s look at the results for the same topic using The Free Keyword Niche Finder:
 

The interesting point here is in the difference between the two results, and the way that the two tools function. The Free Keyword Tool looks at the volume of results across a variety of sources (ISPs, search engines, and toolbars). The Free Keyword Niche Finder takes the same data that The Free Keyword Tool is using and then clusters that information semantically. So what we’re seeing here is that some keywords have a longer or more substantial “tail”.

Take one of the more popular niches (“refurbished laptops – dell”) and enter that keyword into the Niche Finder:

 
Assuming we’re using Refurbished Dell Laptops as a campaign, these would make for a series of pretty tight Ad Groups, ranging from approximately 10 – 35 keywords. This allows you to write very targeted ads and create a very specific, compelling landing page for each group.

4. What is the Keyword Grouper and how does it work?
The Keyword Grouper offers similar functionality to the Keyword Niche Finder, but instead of asking for a keyword as input, it groups existing data. You can export data from your analytics or a search query report, drop it into the tool, and then The Free Keyword Grouper segments that data.

Just drop in a list of keywords, and it provides a list of results similar to what you would find with The Free Keyword Niche Finder. This is a nice way to look at either a list you already have, or to examine historical data on a client site or an existing site you may be taking over. You can then leverage the same advantages The Free Keyword Niche Finder offers.

5. How can I get these tools?
The tools are free and easy to use; all you have to do is create a free WordStream account to gain full access to both tools, the Keyword Niche Finder and the Keyword Grouper.

By Craig Danuloff, President and Alex Cohen, Senior Marketing Manager at ClickEquations

Quality Score is Google’s way of assessing how relevant your paid search keywords are to the searchers you’re targeting.  In our popular blog post about The Economics of Quality Score, we showed how improving your keywords from 7 to 10 could reduce your CPCs by 30%.

But, the way Quality Score works and how you can improve your Quality Score isn’t as easy to understand as it should be.

Just How Important Is Quality Score?
Quality Score plays a critical role in two formulas that Google uses to determine where (and if) your ads appear and how much you pay for clicks.

Quality Score and Ad Rank
The first is the formula for Ad Rank. This is the math that decides which ads appear in the top slot, which ones sit in position #2, and so on all the way down to the point at which ads don’t get shown at all. The formula is:

 
Quality Score is equally as important as your bid in terms of when and where your ads are positioned. It’s the sweat-equity of PPC. You can out-maneuver bigger or slower competitors without spending more.

So if your keyword earns a Quality Score of 10 and your nearest competitor earns only a Quality Score of 5 for that same keyword, your $2 MaxCPC will earn you a higher Ad Rank (and display position) than your competitor’s $3 MaxCPC. Your Ad Rank = 20 (10 x 2) while their Ad Rank = 15 (5 x 3).

If two competitors have similar or equal bids, obviously the higher Quality Score will earn a higher position.
And since there are often more advertisers than available display slots, the Ad Rank impact of Quality Score in many cases is the difference between an ad displaying and not displaying at all.

Quality Score and Your CPC
After Quality Score is used to determine the position of your ad, it is used again to calculate how much you’ll pay for each click.

The formula for your CPC on any keyword is based on the Ad Rank of the advertiser who scored just below you and your Quality Score.

 
Using the previous example, our Ad Rank was 20 while our competitors’ Ad Rank was 15. Our cost-per-click is then calculated as 15/10 + $0.01 or $1.51.

For every point (or fraction of a point) our Quality Score goes up, our cost-per-click goes down. And each rise in our Quality Score literally costs us less money on every click.

Assuming that the average Quality Score is 7 (which is our experience based on ClickEquations clients), earning a Quality Score of 10 is like getting a 30% discount. If your Quality Score is 5, then you’re paying a 40% per-click premium.

These are approximate values, because the numbers Google reports to us as Quality Scores aren’t the actual numbers they use in their calculations. We can assume they have much more precision than they share, and their numbers may or may not be exactly proportional to those they show us.

5 Steps to Improve Your Quality Score
Understanding and optimizing your Quality Score puts you in a powerful position: you can improve performance while reducing costs.

1. Prioritize: Analyze and prioritize your Quality Score optimization
2. Align: Precisely match search queries with ad copy
3. Revise: Extensive ad copy tests to find best performers
4. Remove: Delete or pause ineffective keywords
5. Eliminate: Landing Page problems and penalties

To get started, we’ve put together our 5 favorite tips to boost Quality Score

1. Prioritize Your Optimization - They say sunlight is the best disinfectant, and you need to know your Quality Score before you can improve it.  Pay as much attention to Quality Score as you do to CPC, CTR, and Conversion Rate.

A great way to start is by creating a distribution of your Quality Score to get a snapshot of how things look overall. Here’s one example.

Then, sort campaigns by spend, then ad groups by spend, and finally keywords by Quality Score. In those top spending campaigns and ad groups any keyword with a Quality Score below 7 should be the priority for Quality Score improvement.

2. Align Search Queries and Text Ads  – Because Quality Score is driven by click-through-rates, the more you can narrow ad groups so that keywords (and the search queries they attract) are highly relevant to the provided text ad copy the better results you’ll see.

For example, a pet website selling organic pet food wouldn’t want to have the keywords “organic dog food” and “organic cat food” in one ad group. Each of those searchers has a specific pet and a specific pet food need, so they need custom ad copy and landing pages to maximize CTR, Quality Score, and ultimately conversion rates.

3. Revise and Test Ad Creative – Writing compelling, persuasive and distinctive text ads is the most important way you can improve CTR and drive up Quality Score. (The presumes you have organized ad groups narrowly as described above.)

Find the lowest perform text ads (by CTR) in the highest priority ad groups (by spend).  Remove poor performing text ads and work to introduce new ones that are even better. To really figure out what works, run disciplined tests. 

Here are some tips for writing killer text ads.

4. Remove Bad Keywords - Because Quality Score looks at historical CTR beyond the keyword itself, it’s important to remove low CTR keywords and text ads that pull down your overall average and historical rates.

Before deciding to pause or delete a lot of keywords with relatively low CTRs, you should consider the overall distribution of Quality Score within your account. If your account shows these strong signs of solid Quality Score performance, you can be less vigilant about hunting down and removing the low-end performers.

If you’ve got some Quality Score drag, the ?rst step is to remove keywords and text ads that have particularly poor CTRs relative to their closely related peers.

For example, you may have one or more particularly broad keywords within an ad group that gain a massive number of impressions but achieve very low CTR. The decision to pause those is an easy one.

If you have a new or marginally performing account,  you may need to cut more off the bottom and put tighter controls in place, at least until you push the vast majority of your keywords to a Quality Score 7 or higher.

There is a weight of history to the Quality Score calculation so the longer you let poor results linger the harder it may be, and the longer it may take to earn your way out.

5. Eliminate Landing Page Problems  – Of all of the Quality Score components, landing pages are the source of the most confusion and myths. Let’s start by clearing up some of the more egregious ones:

a. Landing pages can only hurt Quality Score, they can’t help it. Generally, only major problems will cause landing  page penalties.

Here are some obvious things to avoid
i. Extensive, unoriginal copy (such as scraped text)
ii. Pop-up advertising
iii. Landing pages that are “bait and switch” offers or that have very little to do with the ad or search query
iv. Very slow loading pages

b. Unlike keyword Quality Score, landing page Quality Score is not updated frequently. If you make changes, be patient. It make take a few weeks to see the impact.

Google landing page guidelines provide the most definitive suggestions.

***********************
Craig Danuloff and Alex Cohen work at ClickEquations, a complete, easy-to-use paid search platform for large advertiser and agencies. For more free tips, check out the ClickEquations Learn section and their paid search blog.

By Kim Toomey,  Anvil Media

Integrating Google Analytics and AdWords is as easy as clicking a few buttons in your account settings. Despite the easy process, these two programs combined provide powerful data that can improve your PPC accounts more than your standard AdWords data alone. Knowing how visitors behave on your site once they click on a PPC ad is really the true test of how effective your keywords, ad text and landing pages are, not just click through rate and conversion rate.  Here are four reports to look at in Google Analytics that will help to improve your PPC performance.

Keyword Position Report
This gem of a report is hidden in the Google Analytics navigation but is well worth finding. Under Traffic Sources there is a whole AdWords section. Within your AdWords reports you’ll find a keyword position option. The report looks at your top traffic driving keywords and visits based on ad position for that keyword.
 
This report also features a drop down menu so you can look at a variety of data for that one keyword, and determine the most cost effective position for your ad to be in (Average order value by position, Per visit value, % of new visits, etc.)

Using these metrics you can then set your position preference at the keyword level and have a good idea of your maximum cost per click for that keyword in a given position based on your average per visit value.

Ad Version Reports
Although you can get conversion data for each of your ad text variations in AdWords reports, using the Ad Versions report under your Traffic Sources section gives you even more metrics for each ad. Here you can sort your ads by the most revenue generated or goals completed and discover what messages are resonating with your audience best. You’ll also have the opportunity to look at what ads drive the least amount of revenue and consider pausing them or doing an A/B test to find a better message.
 
PPC Landing Page Performance
Now that we have our ads optimized and in the right position, we need to ensure our landing pages are doing what they are supposed to, i.e. drive sales. Using the Advanced Segments feature in analytics, select only your paid visitors.
 
Now navigate to your Content report and look at top landing pages. Using the comparison feature in Google analytics, you can measure bounce rate compared to the site average, and make changes to your site’s landing pages or bring visitors to an entirely different page.
 

Paid Keyword Time on Site
Every business has a unique buying cycle that requires a different number of touch points before a conversion occurs. It’s critical to your campaign success to know what keywords may be at the beginning of your customer’s buying cycle, as they may have lower conversion rates, but drive very engaged visitors who will come to your site multiple times. Keywords with a high time on site but don’t drive conversions are often critical to keep in your account to catch visitors early-on in their decision making process.

Equally important to keywords with a high time on site value, are keywords with a very low time on site. These are likely low volume keywords that you may find are not highly relevant to your site, or may have multiple user intentions. This report will also pull in any content network placements if you are running ads on Google’s content network. Remember, you are paying for these keywords and placements, and they are resulting in visitors who immediately leave your site. Use this report to clean up your campaign and pause underperforming keywords or placements on the content network.

Google Analytics provides campaign metrics that can help take your PPC account to the next level.  By looking at the bigger picture of how your paid traffic visitors interact on your site, you can find powerful insights to make your PPC campaigns more effective and deliver a better ROI.

********************
Kim Toomey works for the Portland-based SEM agency Anvil Media, Inc. She has expertise in all aspects of search engine marketing and specializes in social media strategies and analytics optimization. Kim has been responsible for the development and execution of dozens of search and paid marketing campaigns during her time at Anvil.

By Mary T. O’Brien, Founder PPC Summit

For years Search Engines have been pushing contextual ads (content advertising) as a way to increase their distribution and revenue, but it seemed like advertisers just weren’t buying it. Ads on content networks have historically performed far worse than their counterparts in search campaigns causing many advertisers to just give up working with content networks at all.

Now, finally, that seems to be changing.

At our recent PPC Summit in Los Angeles, David Szetela’s “Successful Content Advertising – Why Content Ads Can be Your Ace in the Hole” session played to a full house. Of course, that is partly explained by the fact that David is a great trainer and previous attendees know that David always shares a ton of great information and is a fount of search knowledge, but it’s also because content ads are finally coming into their own and capturing their share of advertiser dollars.

In addition to the offerings by Google Adsense, Yahoo Publisher Network and Microsoft adCenter, there are also many stand alone content networks that provide the opportunity to target your customers successfully earlier in the buying cycle, often at a cheaper price than a search campaign.

Some of the networks that you may want to check out include: Context Web (particularly their ADSDAQ self service product), Kontera, Quigo (now part of AOL) and Industry Brains (part of Marchex, and particularly good for B2B targeting). Bigger publishers/Social Networks are also getting in on the act successfully like Facebook, Linked In and Digg’s new content ads offering.

Many of these networks provide excellent Behavioral, Demographical and Geographical targeting that allow you as an advertiser to really drill down and reach your target audience. But still, this is a much more complex product than search. If you don’t know what you’re doing, you can blow through a significant budget in a weekend, hence the interest in David’s session in LA. Advertiser’s now get that there is opportunity in content networks – IF you really know what you are doing.   

So what are some things to look out for?

1) Assume that buyers reading content ads are in the very start of the sales process. Actually they may not be in the sales process at all yet. Your ad needs to whet their interest and push them into the funnel. Ads need to read like headlines from the National Enquirer, obnoxious, eye-catching, jumping off the page.

2) As keywords aren’t bolded in content ads, and aren’t counted for Quality Score, you can focus less on USP’s and more on just trapping clicks.

3) These potential customers need strong incentives to click through, so offer free white papers, samples, reviews, trials etc.

4)  Study your where your competitors ads appear. You are not only competing with them you are competing with all the content on that page, so your ad needs to shout just to get attention. Use all of those words that you would never normally use in your copy like: STOP! WAIT! CLICK HERE! LOOK! REGISTER NOW! Etc.

5) Include product prices and special offers. Just make sure they are tied back to specific landing pages on your site that mention these offers so there is no disconnect for your visitors.

6) Create separate search and content campaigns.

This will allow you to:
• Optimize your ad groups and ad text specifically for content pages.
• Target different audiences.
• Use more general (earlier buying cycle) keywords to strengthen the theme of your ad group, without affecting your search performance.

7) Before you even think about attempting a contextual advertising campaign, make sure you have a comprehensive tracking solution in place. Content campaigns can really benefit from testing and tracking, even more than search campaigns.

These are just some basic steps to get you on the right track with Contextual Advertising and there are far too many to list here. David covers more than an hour of tips in his Content sessions at PPC Summit and AdWords Advantage. Overall these campaigns take a lot more tweaking to get them to perform, but the point is they CAN perform very effectively if you do them correctly.

Think “Media Buy” rather than “Search Campaign” and that will help you to focus your attention more effectively. The networks will continue to add targeting and distribution options to make this traffic more effective as time goes on. Pay attention and keep up with the changes. Sometimes a little tweak that works for your particular audience is all it takes to make a content campaign really effective. Once you get this traffic source to work for you, it can really help your budget by allowing you to capture a much lower CPA. Just as with search where you what you take away (negative keywords) really impacts results the same thing is true of content. The traffic sources you remove from your campaigns will determine your success overall.

For more info on Contextual Advertising follow David on twitter http://twitter.com/Szetela or check out his upcoming session in Chicago at the PPC Summit or online at our upcoming online AdWords Advantage event.

Pay Attention. This could be the best source of traffic you’re underutilizing and you can’t afford to do that for much longer.

By John Robbins, Account Executive, Anvil Media, Inc.

According to Business.com, on average, 13 different people within an enterprise level organization touch a purchasing decision before final approval.  Even within mid size companies, those 13 people are likely spread throughout the organization horizontally, and, even more so, vertically.  Because of this, only targeting upper level management is a short sighted and typically ineffective model for advertising for a B2B provider.   By understanding how each level of an organization searches for your solution you can effectively target multiple management levels by advertising to their needs, desires, and wants.

Middle Management

This is the level of a company where most pain points for day-to-day operations come to a head.  Because of this, these managers are likely to perform searches that are solutions based and are attempting to solve a specific problem.

How do they search?
For example, your company is offering document management software solutions and a potential customer is experiencing issues with processing document approvals efficiently.  A mid-level manager may not be familiar with industry jargon or terms and instead performs a query for “help with document approvals”.  This is a very broad query as they may not even be aware there is a software solution out there to search for. 

How do you reach them?
Unless you are using broad match, in your PPC efforts, on a term like “document approval” you would miss this impression and this initial touch opportunity.  Using the search query tools provided can help you ensure you are not missing opportunities at a broad match/very general keyword level. 

Also, these searchers are seeking education and solutions.  The messaging and landing pages for these keywords should reflect this need.  While seeking information, this level of management is less likely to provide contact information as they often do not desire or feel comfortable being the original contact point.  However, that doesn’t mean you should not track how they interact with the site.  Tracking paid visitors that used these keywords and creating specific KPI’s for them can help ensure your first impression is a good one.  While these visitors may not convert often, understanding and tracking how they interact with the site is still important and they should be given specific KPI’s that track their on-site engagement through metrics such as time on site and page/visit.
 
Upper Management

When a need for a solution to a problem reaches this level of management, it usually is receiving some significant attention by the organization.  However, the focus will be on product specific queries as they will already been given a list of 2, maybe 3, options of solutions with recommendations potentially already made.  While using jargon can be a dangerous proposition in marketing, if the search volume is there, there is no reason not to go after it as long as the messaging is not overloaded with it.  Besides jargon, more specific industry terms will also fall into this bucket as upper level management will either have, or have been given, information/research about these terms.

How do they search?
This level of manager doesn’t have the time or even the need to research solutions based keywords (as this has already been completed).  Where lower management is often seeking solutions to specific problems, upper management makes the shift to searching for the products that provide these solutions.  Instead of searching for “help with document approvals”, upper level managers will search for “document management software”.  These types of keywords are likely your current bread and butter for generating leads and this is for good reason – you are now speaking to those who are decision makers and instigate conversation with potential vendors. 

In addition to product specific keywords, these folks will also use branded searches to quickly find the site for review.  Ensuring your branded campaigns are properly optimized and the ad messaging is speaking to the big picture solution your company provides will help to ensure these final searches are effective.  For example, say an Information System Manager participated in your webcast and is the initial lead, remember they have likely passed that information on to at least 2-3 other people that will be involved with the decision and they are now searching via branded terms (either company or products).

How do you reach them?
As the goal of this keyword group is to have a high conversion rate, focusing on providing options to convert will allow the highest opportunity to produce a viable lead.  This level of management is where real lead generation begins and the conversion points should reflect this by collecting as much contact information as possible through a wide range of capture points on the site – webcasts, downloads, white papers, sign-up forms, etc. 

While this strategy focuses on tracking keywords based on management level, don’t forget about the content network.  This strategy can be augmented to target placements based on what each level of management is reading online.

Now, I am not recommending you change how your PPC accounts are organized as this method is about tracking keywords and their reach and effectiveness at driving the next touch point.  What this really comes down to is Attribution – tracking your many touch points within an organization using broad terms to reach mid-management, using product and branded terms for upper management and high level executives.  By understanding why each management level is searching for your solutions and providing a targeted message to each, you can ensure your brand is presented to each level of the decision making process.

**************************
John Robbins is an Account Executive at Anvil Media, Inc.  John graduated from Portland State University with a BS in Marketing.  John has been working with Anvil Media in Portland since 2008.  John has extensive experience with both B2B and B2C clients, specializing in developing SEO, social media, and PPC strategy to increase client visibility and ROI.

Learn How to Develop Smart Ad Text and Landing Pages to Quickly Increase Qualified Leads.

By: Jon Rognerud, Entrepreneur.com’s SEO columnist and Founder Chaos Map

To begin, think for a moment about these real-life Pay Per Click (PPC) business scenarios:

1. A large budget, #1 position bidding, random click streams, poor keyword matching, low CTR’s, low conversions

2. A limited budget, competitive positioning, targeted clicks, phrase and exact keyword matching, high CTR’s, excellent conversions

Which one would you rather see in your results? Personally, I’d use smart bidding, ad copy development and testing strategies, and scale up from the second option. However, to succeed, a PPC manager of the latter should also spend creative time thinking about how to reach out, and into the psyche of their users and marketplace.

Start with the end goal in mind; and know who your users are. What is their persona? Audience checker is an interesting tool to help kick start your thinking. Make sure you understand the difference between an influencer and a real buyer (the person with the credit card). Also, think about how the ad and message fits within the purchasing stages; awareness, research, compare and buy. The messages will and must vary.

I ask the analytical minds out there to stretch a bit here. You need to get more creative and learn to develop connection points with your customers early on. The notion of the discovery and results of pre/post-clicks must be included in your strategy. Relevancy is super important, and throughout the user navigational experience. Most everybody has heard of and some experienced the Google Slap. I’ll share some techniques and a simple formula that can help you prepare for a better outcome, and not simply waste dollars and time doing A/B testing at will.

At the end of this post, ask yourself this question: “How much time do I spend on ad and landing page strategy”? If the answer is “10-15 minutes”, you need to start over.

The Best Ad Example – Ever?

The well documented and trusted “AIDA” (Attention, Interest, Desire and Action) formula is used by many copywriters. See how this story and example fits that structure.

You may not be familiar with Ernest Schakleton. He was a bold adventurer who took 20+ men on a virtually impossible trip to the South Pole and back in the early 1900’s. To start his campaign, and solicit his men, he allegedly wrote this ad, and placed it in a London newspaper:

“Men Wanted (headline): For hazardous journey, small wages, bitter cold, long months of complete darkness, constant danger, safe return doubtful – honor and recognition in case of success”.

Think about the message here. Extremely direct, action oriented and with a clear benefit statement. The ‘landing page’ was his address. He supposedly received thousands of applications from this ad.

While he did not have to conform to Ad standards per se, and with short text ads constraints like Google Adwords, it’s important to know what Google offers as your canvas for creatives. You have 4 lines with an optional Geo-target to work with:

• Head: The all important headline (Draw, Create Attention, Keywords)  (25)

• Line1: A clear benefit statement (Build Interest)   (35)

• Line2: Decision statement (Click, But Why?) (35)

• Display URL: Action page (Now Do it: Click!) – keyword rich (35) • (optional) Geo Targeting: Example: California You’ll have to narrow your copy down to fit these guidelines.

Demographics

Do you know if your audience is targeted, qualified, and who they are? You must know who you are writing to, and then present them with the information.  When writing, keep this knowledge in mind, and try a more personal approach, versus a (boring) business approach. People buy from people! You might run a survey and special polls in your blog, for example – to see what needs your customers are having. Microsoft asks: What is their (commercial) intent? Get your research done, and compare messages from your competitive landscape. Use Google search, type your keywords – and review the ads, while you also add tools like Spy Fu to discover more details about them.

Setup

Just like in the movies, you start with a setup, work your plot and finish with a killer punch line. You need to do your research (Google Keyword Tool, Google Trends). Your goal must be to ensure a match of what they are looking for, what they want to hear – and not what you think.

If your CEO or VP doesn’t like the ad copy, politely explain that you are researching, and that you will be testing against many. One way to begin this process is by writing a longer paragraph, and narrowing it down from there. You will feel too constricted by editing your ad directly within the platform. Write it down on paper. For fun, try to have a customer, friend or vendor read the ad copy. At least read it out loud for yourself. Much like text on a landing page, your ad copy should be clear and make you want to take action.

Inform

Are you helping to enforce the pain established and by educating them further? Make sure that you are speaking their language, and match with keywords in the headline to begin. Continue to test and tweak, and track it. Read up on advertiser guidelines from Google and Yahoo. A simple exercise to help develop a finer ad copy edge is to listen, observe, be curious, ask questions, problem solve and make connections. These drivers along with competitive analysis, even outside of your niche – can really help!

The Sizzle

When they (scan) read through the copy or ad, make sure it’s not only personal, but do stimulate with special offers and emotional ties. Make sure to include benefits, and use questions in headline and within body. Try numbers and different symbols to make it stand out. Draw them to the most desired action.

The Most Desired Action!

The call to action should be strong, clear and direct. Think of the outcome desired, and reflect that both on the ad and the landing page. Do not introduce many options, make it easy. Action statements are: Learn more, Buy now, Click now, Download now, Free shipping (if you act now), etc. Build more landing pages and test those, keeping relevancy in focus. Do the same with the ads. Adding an extra / keyword parameter in the Display URL can help. Building out multiple, custom domains should also be tested, including sub-domains. Continue to test, don’t stop!

On the Adwords side, create smaller keyword sets in tighter buckets, and use phrase and exact matches to related landing pages with an eye on SEO page copy development. You’ll have created optimum leverage, and a nicely integrated system to test with.

Conclusion

Begin to apply these tactics to shift to a more creative side, whilst maintaining top performance across all your campaigns. Yeah, and purchase this book right now – it’s a perfect fit for your ad copy development: “Tested Advertising Methods” (J. Caples).

And, finally – in the words of Napoleon Hill, the author of Think and Grow Rich: “Whatever Your Mind Can Conceive & Believe, It Can Achieve”. These are inspiring words to start making a change in your behavior and approach for ad copy development and more.

P.S. Make sure to check the load speed of your landing pages, and always test ads and landing pages against your best performing ones. Google Adwords can do this for you at the ad level (A/B testing ads) and Google Web optimizer at the landing page level.  For more advanced users, try the Duration Calculator to find out how long to test a page when using multiple elements.

***************

Jon Rognerud is Entrepreneur.com’s SEO columnist, an SEO consultant and the author of The Ultimate Guide to Search Engine Optimization, in bookstores now. He has more than 20 years experience building software and marketing projects, including creating content and application solutions at Yahoo!/Overture. His SEO company in Los Angeles provides search marketing solutions for midsize businesses, and focuses

By Elisa Gabbert, Content Development Manager, WordStream

It’s crucial to find and use negative keywords if you want to maximize the value of your pay-per-click campaigns. Setting negative keywords ensures that you don’t waste advertising budget on impressions for search queries that aren’t really relevant to your ad. Those useless impressions will quickly drag down your click-through rate and Quality Score, driving PPC costs up.

So how do you develop a list of negative keywords for your PPC campaigns? You can sit around and brainstorm for possibilities, but this is inefficient, and there’s no way you’ll dream up every negative keyword that your ad might match for.

Here are four simple ways to discover negative keywords, and some tips on how to implement them.

1. Generic negative keyword lists
Pre-assembled lists of negative keywords are available for a number of industries. For instance, if you’re selling a B2B product, you might want to include “free” as a negative, or you might want to create a list of adult terms you don’t want your ads to match on. These can be a decent way to get started on building your list. However, the downside is there in the name: these are generic negative keywords, and they may not all apply to your specific business niche. In addition, many potential negative keywords may be missing from these lists.

2. Through keyword research
 You can find negative keywords while you’re conducting regular keyword research; just keep your eyes open for keyword suggestions that aren’t relevant to your business. For example, one of the top keyword suggestions for “monitor” (as shown in the results from WordStream’s Free Keyword Tool below) is “heart monitor.” It’s a good bet that a number of those thousands of suggestions are similarly irrelevant to your computer supply business.

Start to create a list of negative keyword possibilities through your research, in much the same way as you would a list of keywords you want to target.

3. Search query reports
A third way to find negative keywords is to look at your search query reports in AdWords (or pay-per-click platform of choice). This report shows you the actual search queries that are triggering your text ads (as well as the match type, number of impressions, number of clicks, CTR and other relevant information). Accordingly it’s a good idea to comb through these regularly and eliminate any irrelevant keywords from your ad groups. This method of negative keyword discovery is more thorough than the above options, because it’s based on real data from your own PPC account.

4. Your organic search (SEO) log files or analytics
Perhaps the best method of all these four options, your own log files or analytics are an excellent source of potential negative keywords. These files keep a record of every phrase that drives a visitor from a search engine to your site. There’s one main advantage to this method of negative keyword discovery over search query reports: You can catch negative keywords before they trigger your ads. (And as a best practice, you should eliminate irrelevant keywords from your organic keyword research as well.)

Implementing Negative Keywords in Your PPC Campaigns

Those are some basic ways to expand your negative keyword research. But what do you do with the list once you’ve found them? You probably know about the various match types for keywords (broad match, phrase match and exact match). These match types also apply to negative keywords.

For example, you can use the broad match option (-heart monitor) to prevent your ad from showing for any search query that includes both “heart” and “monitor,” such as “heart rate monitor”; phrase match (-”heart monitor”) for any search query that contains “heart monitor” in that order, such as “holter heart monitor”; or exact match (-[heart monitor]) to eliminate only searches for “heart monitor” verbatim.

Experiment with these negative match options and monitor your campaign to see which is the most effective and cost-efficient for each negative keyword.

*******************************
Elisa Gabbert is the Content Development Manager at WordStream, Inc. You can get in touch with Elisa by sending her an Email at egabbert (at) WordSteam dot com, by following her on Twitter, or by reading the WordStream Internet Marketing Blog, where she is a frequent contributor.

By Heather Lutze, Founder, Findability Group

Mention the words SEO (Search Engine Optimization) and PPC (Pay Per Click) to most businesspeople and you’re sure to hear stories of frustration. Either they’ve handed their company’s web site SEO and PPC activities over to an agency and have little idea what’s going on with either, or they’ve “done it themselves” and have had lackluster results at best.

This is unfortunate, because SEO and PPC are the foundation of any good web site. Think of it like building a house. If you build the roof before you build the foundation, you really don’t have a house. Likewise, if you launch a web site or engage in fad web marketing techniques (such as Facebook, Twitter, etc.) without solid SEO and PPC in place, you’re wasting both your time and money—two things that are precious in the business world.

Complicating the whole SEO and PPC experience is that many businesspeople are so determined to please Google and appear under certain ego-focused keywords that they neglect their customers and how they search for products and services. For example, suppose you have a web site that sells high-end gas grills. As such, you’re fixated on seeing your company come up under a general search with the keyword phrase “gas grills.” But that’s an informational, ego-driven keyword phrase, not a selling keyword phrase. When people are ready to buy a gas grill, they don’t search with vague keywords. Rather, they type in something like “Viking stainless steel outdoor propane grill model 5529.” Now that’s a buying keyword phrase. And face it…at the end of the day marketing is about getting customers in the door and paying your bills. It’s not about seeing your company under a general keyword and pleasing your ego.

When you stop trying to please Google and start pleasing and connecting with your customers, you will end the frustration and will start getting the results you want from your SEO and PPC campaigns. Use the following tips to make connecting with your customers and maximizing your SEO and PPC a profitable endeavor.

1 Use PPC first to fish for keywords.
Fishing for keywords is a like throwing out a big net into the ocean. The more narrow or refined the holes are in your net, the better the quality of fish you’re going to pull back. When you’re new to PPC and SEO, you don’t know which keywords will work for your web site. At this stage you need to balance the general, obvious, and informational keywords with the longer keyword phrases that will attract customers who are ready to take action. Therefore, start slowly with long keyword phrases and then shorten your phrases over time (open up the holes in your net) to let more general traffic in. Over a testing period of at least 30 to 90 days you can see a pattern of which keywords give you business and which are a waste.

The general rule of thumb is to start with approximately 500 keywords. As you see what works, you can narrow your keyword list. Also, your number of keywords depends on your industry, your company, and the length of time you’ve been testing keywords. Some companies who have years of testing and research under their belt have a finely narrowed list of only ten keywords, while others have a keyword list in the hundreds of thousands. The bottom line is that you don’t know what your company’s findability is until you start throwing out that net and tracking your PPC results. So don’t rush into a web site redesign or other web marketing activities until you have tested in PPC.

2 Apply your top performing PPC keywords to your SEO campaigns.
Take the knowledge from your test period, which again is a minimum of 30 to 90 days, and apply what you learn about top performing keywords to your SEO campaigns. The goal is that you don’t waste time and money on SEO terms that will never help you. Therefore, as you analyze your PPC information, look at which keywords are getting clicks and which ones lead to a conversion or a purchase. A conversion could be someone downloading a white paper, filling out a contact form, taking a survey, etc. It’s some activity that gets people involved in your site. A purchase, as the term implies, is when someone buys something from you. Find out how many clicks it takes for someone to say “yes” to your offer and make a buying decision. You may find that it takes three to four clicks before someone takes action.

3 Carefully group or theme your SEO keywords by page content.
The prime objective of SEO is to prove to Google (or any other search engine) that the content on your site is worthy to be placed on the front page under a particular keyword. “Worthy” means you have the content on the page in such a fashion that Google sees repetition of the keyword, either in your text or in your code. This proves to the search engine that you belong under a certain keyword.

The challenge is that many business people have a fruit salad mentality. In other words, even though each page of their site deals with a particular topic or theme (and should therefore have page specific keywords), the keywords for every page are identical. So even though one page is dedicated to bananas, one page to apples, and one page to oranges, every page has keywords that relate to all fruits. This confuses search engines because they don’t know what you really are. As a result, your site never gets found.

Rather than think “the more keywords the better,” think in terms of compartmentalizing your keywords. So if one page covers who you are as a company, that page should only have keywords about your company. Likewise, each product page should have keywords that apply to that specific product only. Those companies that clearly define who they are by keyword on a page by page basis win.

4 Submit only once to search engines.
While Google and other search engines will find some of your pages naturally, if you want to be sure they find every page of your site then you have to manually submit it to them. However, you don’t want to submit to them every day. Once they have spidered your site, you don’t need to submit it again unless you add a lot of new pages or make significant revisions. Many online submission tools sell the idea that you should submit your site every day. Such an approach only ends up frustrating Google rather than helping your company. So let the search engines know you’re there, but don’t harass them.

5 Get great inbound links to your site.
Google looks for two types of links. The first is a non-reciprocating inbound link from a reputable source, such as an industry association, the Better Business Bureau, etc. Since a link from another site is essentially an endorsement, getting a link from a reputable source—one where you don’t link back to them—is the gold standard of links. It’s not an “I’ll scratch your back if you scratch my back” sort of arrangement, and Google likes that.

The second type of link is a reciprocated link, meaning you link back and forth with the company or person. Such links are good, although the search engines don’t place as much value on them. Realize that if you’re an authority you are going to link to others, and Google expects this. However, when you have 800 reciprocating in every category under the sun, you send a red flag that your site isn’t of value. Any link you have needs to be appropriate and industry related; therefore, only link to people and partners you know and that make sense for your site.

6. Make Your Web Site Work Smarter
Only after you take the needed steps to maximize your SEO and PPC, which typically takes a year or more to fine-tune, should you redesign or relaunch your site, or engage in trendy marketing endeavors. While SEO and PPC are in-depth and intense activities for a business to undertake, they are the foundation of any good web site that effectively reaches the company’s target market and coverts prospects into paying customers. So whether you decide to tackle the project yourself or hire an agency to help you, always be aware of and stay on top of the basic tenets of SEO and PPC so you can get the results you want.

*********************************
Heather Lutze is the author of the newly released book, “The Findability Formula: The Simple and Non-Technical Approach to Search Engine Marketing” (Wiley and Sons). As a nationally recognized speaker and author, she has spent the last 10 years as CEO of Findability Group – a Search Engine Marketing firm that works with companies to attain maximum Internet exposure. Heather is also a speaker for Pay Per Click Summit, and previously spent two years training on Yahoo! Search Marketing. For more information, visit www.FindabilityGroup.com.